silicon planar power transistors cjf2955 pnp cjf3055 npn to-220fp fully isolated plastic package general pur p ose am p lifier and switchin g a pp lications. absolute maximum ratings. description symbol value unit collector emitter (sustaining) voltage v ceo ( sus ) 90 v collector emitter voltage v ces 90 v emitter base voltage v ebo 5v rms isolation voltage ( for 1sec,r.h. (1) v isol (a) 3500 v rms <30%, t a =25oc ) (b) 1500 v rms collector current i c 10 a base current i b 6a total power dissipation @ tc=25oc p d ** 30 w derate above 25oc 0.25 w/oc total power dissipation @ ta=25oc p d 2w derate above 25oc 0.016 w/oc operating and storage junction t j, t stg - 55 to +150 oc temperature range thermal resistance from junction to ambient r th (j -a ) 62.5 oc/w from junction to case r th (j -c ) ** 4 oc/w lead temperature for soldering purpose t l 260 oc **measurement made with thermocouple contacting the bottom insulated mounting surface (in a location beneath the die), the device mounted on a heatsink with thermal grease and a mounting torque of > 6 in.lbs. (1) rms isolation voltage : (a) 3500 v rms with package in clip mounting position (b) 1500 v rms with package in screw mounting position (for 1sec, r.h.<30% ,ta=25oc; pulse test: pulse width < 300 s, duty cycle< 2%) electrical characteristics (tc=25oc unless specified otherwise) description symbol test condition min max unit collector emitter sustaining voltage v ceo ( sus ) *i c =200ma, i b =0 90 v collector cut off current i cbo v cb =90v, i e =0 1 a i ces v ce =90v, v be =0 1 a emitter cut off current i ebo v eb =5v, i c =0 1 a continental device india limited data sheet page 1 of 4 continental device india limited an iso/ts 16949, iso 9001 and iso 14001 certified company
silicon planar power transistors cjf2955 pnp cjf3055 npn to-220fp full y isolated plastic packa g e electrical characteristics (tc=25oc unless specified otherwise) description symbol test condition min max unit dc current gain h fe *i c =4.0a, v ce =4v 20 100 i c =10a, v ce =4v 5 collector emitter saturation voltage v ce ( sat ) *i c =4a, i b =0.4a 1v i c =10a, i b =3.3a 2.5 v base emitter on voltage v be ( on ) *i c =4.0a, v ce =4v 1.5 v dynamic characteristics current gain - bandwidth product f t i c =500ma, v ce =10v 2 mhz f=500khz * pulse test: pulse width =5ms, duty cycle < 10 % continental device india limited data sheet page 2 of 4
to-220fp fully isolated plastic package to-220fp fully isolated plastic package to-220 fp tube packing to-220fp 200 pcs/polybag 50 pcs/tube 396 gm/200 pcs 135 gm/50 pcs 3" x 7.5" x 7.5" 3.5" x 3.7" x 21.5" 1k 1k 17" x 15" x 13.5" 19" x 19" x 19" 16k 10k 36 kgs 28 kgs package net weight/qty details standard pack inner carton box qty outer carton box qty gr wt size size packing detail dim min max all diminsions in mm. a b c d e f g h j 9.80 2.50 4.30 3.10 6.50 14.80 0.40 2.50 2.34 k ? l ? m 0.6 10.36 3.00 4.90 3.40 8.20 17.27 0.70 2.96 2.74 4.70 30.05 0.90 pin configuration 1. base 2. collector 3. emitter 3 2 1 a d c e f k l m j j g 1 2 3 1.5 536.00 label device name sr. qty. end pin 13.74 3 2 . 8 5 6.87 tube thickness 50 pcs./tube all dimensions in mm ammo pack size 20 tubes/ammo pack 1000 pcs./ammo pack 5 3 8 . 0 0 7 5 . 0 9 2 . 0 label d e v i c e n a m e s r . q t y . d e v i c e n a m e s r . q t y . continental device india limited data sheet page 3 of 4 cjf3055 npn cjf2955 pnp
notes cjf2955 pnp cjf3055 npn to-220fp fully isolated plastic package cjf2955_3055 rev100901 disclaimer the product information and the selection guides facilitate selection of the cdil's semiconductor device(s) best suited for application in your product(s) as per your requirement. it is recommended that you completely review our data sheet(s) so as to confirm that the device(s) meet functionality parameters for your application. the information furnished in the data sheet and on the cdil web site/cd is believed to be accurate and reliable. cdil however, does not assume responsibility for inaccuracies or incomplete information. furthermore, cdil does not assume liability whatsoever, arising out of the application or use of any cdil product; neither does it convey any license under its patent rights nor rights of others. these products are not designed for use in life saving/support appliances or systems. cdil customers selling these products (either as individual semiconductor devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and cdil will not be responsible for any damages resulting from such sale(s). cdil strives for continuous improvement and reserves the right to change the specifications of its products without prior notic e. cdil is a registered trademark of continental device india limited c-120 naraina industrial area, new delhi 110 028, india. telephone + 91-11-2579 6150, 4141 1112 fax + 91-11-2579 5290, 4141 1119 email @ cdil.com www.cdilsemi.com continental device india limited data sheet page 4 of 4 component disposal instructions ? 1. cdil semiconductor devices are rohs compliant, customers?are requested to please dispose as per prevailing environmental legislation of their country. 2. in europe, please dispose as per eu directive 2002/96/ec on?waste electrical and? electronic equipment (weee).
|
